Beurer IH 57 Gebrauchsanweisung Seite 52

When cleaning, ensure that any residue is removed and dry all parts carefully.
Never use any substances for cleaning that could potentially be toxic if they were to come into contact
with the skin or mucous membranes, or if they were swallowed or inhaled.
If required, clean the housing of the device using a slightly damp cloth, which you can moisten with a
mild soapy solution.
• If there is any residue from medical solutions or contamination on the silver/gold-coloured contacts
of the device or medication container
• Also clean the outer sides of the mesh and medication container with a cotton bud moistened with
ethyl alcohol.
• The device must be switched off and allowed to cool down each time before cleaning.
• Do not use any abrasive cleaning products.
IMPORTANT
• Make sure that no water gets inside the device!
• Do not clean the device or atomiser set in the dishwasher!
• Do not allow water to splash the device. Only operate the device if it is completely dry.
IMPORTANT
We recommend carrying out inhalation continuously since the inhalant may clog the medication contai-
ner if the treatment is paused for a significant time, and the effectiveness of the administration may
2
be impaired as a result.
Self-cleaning function
To completely remove medication residue and any blockages, you can use the device's self-cleaning
function.
To do this, proceed as follows:
1. Disassemble the device as described above.
2. Open the cover of the medication container
, clean with a cotton bud moistened with ethyl alcohol.
2
and pour out the remaining fluid.
1
52