Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. OPERATION
Filling up the water tank
Press the water tank release push button, remove the tank, open the rubber plug and fill the
tank to its maximum capacity (Fig. 3).
WARNING
Make sure the iron is switched off and unplugged before filling up the water tank.
Accessories assembly
Hold the device and attach the brush head correctly to the steam outlet (Fig. 4).
Using the appliance
Fill up the water tank.
-
Plug the power cord into the power supply.
-
Press the power button: the power indicator light will slowly flash red while the iron is
-
heating up.
After approximately 30 seconds, the power indicator light will illuminate solid red when
-
the iron has reached temperature.
Select the steam level by pressing the setting button: the corresponding indicator light
-
will illuminate green.
If the water tank is empty, the appliance will automatically switch off after 45 seconds
-
and the power indicator light will flash red rapidly.
Protection system: the power indicator light will rapidly flash red after 8 minutes of
-
inactivity.
-
Press the power button to continue using the appliance after the automatic protective
shutdown.
-
Press the power button again to switch off the device.
NOTES
If you want to steam continuously, hold down the steam trigger; otherwise, release the
trigger.
After use
When you have finished ironing, press the power button for 2 seconds: the power indicator
light will go out. Unplug the appliance, allow it to cool down and store it in a dry place out of
the reach of children.
ENGLISH
IRONHERO 1800 ULTIMATE
37
Werbung
