Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Brake handle
Tube under seat
(seat comes up when
you press from both
sides)
Lever for height
adjustment of
push handles
Control upon delivery
After unpacking the rollator please check if anything is missing-if all parts shown in the drawing have been delivered.
If any parts are missing, please contact your dealer immediately.
Unfolding the rollator
Press down both tubes under the seat until the frame unfolds and you can hear a "click". Now the locking
•
device is in a fixed position.
•
To be quite sure that the frame has been fully unfolded try to press the rollator together
•
Attach the strap which connects both push handles (see photo at the right). When the rollator has been
unfolded, you must check that the strap is blocked
•
Check that the levers for height adjustment have been firmly tightened
•
Check that both handles are at the same height and stable
Use of a defective rollator is strictly forbidden.
Always check before use the function of all parts of the rollator. If the above recommendations are not
followed, injuries may occur.
Folding the rollator
•
First detach the strap which is mounted between both push handles
•
Pull the strap at the seat until the frame folds together
•
Now the rollator is folded together
Height adjustment of underarm supports
•
First unlock the strap which is mounted between both push handles
•
Loosen the lever by turning it to the left
•
Adjust the height
•
Turn the lever to the right
•
Attach the strap again
Both handles should always be at the same height.
The correct height of the handles should always be the elbow height of the user when he stands with his
arms hanging loose.
Length adjustment of push handles
•
First detach the strap which is mounted between both push handles
•
Loosen the lever by turning it to the left
•
Adjust the length
•
Turn the lever to the right
•
Attach the strap again
Rev. 08.09.21
Push handles
Brake
12 - 24
Folding strap
(pull here to
fold the rollator)
Seat
Shopping bag
Wheels
UM-312401-06-multi_07092021.odt