Operation Of The Nebujunior ® Inhalation Device; General Requirements; Initial Operation - Fahl NebuJunior Ref 50300 Bedienungsanleitung

15 Operation of the NebuJunior
This chapter informs you about safety precautions which need to
be observed prior to each inhalation therapy.

15.1 General Requirements

The NebuJunior
packaging has been removed and after the following instructions
have been carried out:
• Inspect the device for any external visible damages.
The device must be free of damages.
• Do not operate the NebuJunior
detect any damages to the device.
• Place the NebuJunior
surface, e.g. a table.
• Connect the NebuJunior
power socket.
• Do not place the NebuJunior
or any piece of fabric.
• Check that all air vents are unobstructed.

15.2 Initial operation

Prior to initial operation, make sure that all components as listed
in Chapter 14.1. (Device overview / Scope of delivery ) are
included in the NebuJunior
Then clean and disinfect the device as described in Chapter 16.
In order to guarantee a faultless operation, the
NebuJunior
exposed to direct sunlight or to high temperatures!
56
®
inhalation device is ready for use after the
®
inhalation device on a flat and stable
®
inhalation device to a 230V / 50Hz
®
®
inhalation device.
®
inhalation device is at no time to be
®
Inhalation device
®
inhalation device in case you
inhalation device on a tablecloth