Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Diagram
LED Display
Operating the Charger
Plug USB-C connector into the charger and appropriate
power supply.
Charging
WARNING: Always check charging parameters
before initiating the charge process. Charging
any battery with improper settings, including charging
a battery in the wrong mode, can result in property
damage and fire.
Plug battery into the charger's output port. During the
charging process, the LED is flashing green. The LED
changes to solid green once the battery is fully charged
and ready to use.
Troubleshooting
When the charger has finished a solid green LED
displays.
A solid, red LED indicates a charging error.
Make the necessary changes, and restart the charger to
clear the error.
USB C Power Input
Charge Port
The LED will flash red / green to indicate the charger is
ready to charge the battery.
Stopping the Charging Cycle
WARNING: Always stop the charging cycle or
remove power supplied to the charger if you
notice any irregularities (like a swollen battery) during
charging.
To stop the charging cycle, disconnect the battery from
the charger.
When Charging is Complete
The LED changes to solid green once the battery is fully
charged and ready to use.
Disconnect the battery from the charger.
S10 Charger LED Color
Solid Red
Green Flashing
Solid Green
Red/Green Flashing
Charging error; ensure
battery is healthy and
properly connected to the
charger
Charge in progress
Charging complete
Charger is ready to charge
Werbung
