Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Always keep the battery away from any material that
could be affected by heat.
• Always monitor the charging area and have a fire
extinguisher available at all times.Always end the
charging process if the battery becomes hot to the
touch or starts to change form (swell) during the
charge process.
• Always connect the charge cable to the charger first,
then connect the battery to avoid short circuit between
the charge leads. Reverse the sequence when
disconnecting.
• Always connect the positive red leads (+) and negative
black leads (–) correctly.
• Always disconnect the battery after charging, and let
the charger cool between charges.
• Always charge in a well-ventilated area.
• Always terminate all processes and contact Horizon
Hobby if the product malfunctions.
• Charge only rechargeable batteries. Charging non-
rechargeable batteries may cause the batteries to
Specifications
Output Port Connector
Input Voltage (required power supply, not included )
Charge Current
Supported Battery Type
Related Battery Capacity (Max.)
Display
Operating Temperature
Storage Temperature
Dimensions
Length
Width
Height
Weight
burst, resulting in injury to persons and/or damage to
property.
• The socket-outlet shall be installed near the
equipment and shall be easily accessible.
WARNING:
Never leave charger unattended,
exceed maximum charge rate, charge with
non-approved batteries or charge batteries in the
wrong mode. Failure to comply may result in
excessive heat, fire and serious injury.
CAUTION:
Always ensure the battery you are
charging meets the specifications of this
charger and that the charger settings are correct. Not
doing so can result in excessive heat and other
related product malfunctions, which can lead to user
injury or property damage. Please contact Horizon
Hobby or an authorized retailer with compatibility
questions.
S10
IC2
DC 5.0V (3.0A Max)
1-8.4V (1.5A Max)
Smart G2 LiPo 2S
500–5300mAh
LED
0–40°C (32–104°F)
-20~60°C (-4–140°F)
44mm
24mm
14.5mm
25g
Werbung
