Werbung
Error codes
ES1: The height difference between right leg and left leg exceeds the set value.
Troubleshooting: Reset forcibly to erase the error code.
HOT：Continuous operation for 4min.
Troubleshooting: Take a 20min break.
EE0: Power failure in operation.
Troubleshooting: Power on this product again and conduct the resetting.
ELA：The ports for lifting legs on the control box are disconnected.
Troubleshooting: reconncet the lines of lifting legs and conduct the resetting operation forcily.
E2A：Overloading.
Troubleshooting: remove the loading and make the loading evenly distributed. And conduct the resetting
operation forcily.
If any other error code appears, please contact us for troubleshooting.
service@vernalspace.com
Note :
In case of any obstacles after the anti-pinch and anti-collision function is enabled, the
system will run reversely for 20-40min.
15
Werbung
