Werbung
English
System resetting
Before using the vernal adjustable desk system, please reset the system by pressing and holding the
buttons
and
or error code will appear on the screen. When the motor reaches its limit, the buzzer will work and the
standing desk will rebound for about 5mm. The system will be reset and the screen will display the normal
value in inches or centimeters
Button functions
1. Up: press and hold
the current height of the motor and turn off in 10s after this button is released.
2. Down: press and hold
display the current height of the motor and turn off in 10s after this button is released.
3.1 Setting of memory location 1: Press
height in a flashing manner for 3s. The current memory location will be the memory location 1.
3.2 Memory 1 Operation: Short pressing is the default mode. See Section Limit setting point 3 for details about
long pressing and short pressing.
⑴ In the short pressing mode, if the motor is not at any location of the memory 1, press
it. The motor will run to the location of the memory 1, and its height will be displayed in real time.
⑵ In the long pressing mode, if the motor is not at any location of the memory 1, long-press
will run to the location of the memory 1, and the screen will display the location value of the memory 1.
13
during the whole resetting operation. The motor will be forcibly reset , and the
/
to enable the motor to rise and release it to stop the motor. The screen will display
to enable the motor to descend and release it to stop the motor. The screen will
and
.
at the same time for 3s. The screen will display the current
and release
. The motor
Werbung
