ADE M111600 Gebrauchsanweisung Seite 10

Hold function
The scale is equipment with an automatic hold function. The weight of the baby will automatically be
locked in the display during each single weighing cycle. You can take the baby off the scale and
read the weight on the display for 60 seconds. In order to unlock the weight, press the HOLD key
again. The scale will fully automatically re-weight if the baby is still placed at the scale or will show
zero.
Cleaning
For cleaning just use a damp cloth or common disinfection products. Do not use any aggressive
cleaning fluids. Make sure no water or cleaning fluid penetrates the scale.
Fault messages
If LOBAT is displayed, please replace the batteries. Always use two new batteries.
In case the scale does not show `0.00´ after having been started, press TARE to find the zero point.
In case of faulty results:
1. Make sure batteries are inserted correctly.
2. Make sure you are in the weighing mode you selected (kg / lb / oz).
3. Do not load the scale before the display shows `0.00´.
Disposal
Electronic devices are no domestic waste.
If the scale is out of use the responsible waste disposal association will be glad to
advise you on the measures necessary to dispose of it properly.
Make sure only discharged rechargeable batteries respective rechargeable batteries
with isolated poles will be disposed as otherwise short circuits may occur.
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded.
Warranty does not include natural wear, damages caused by incorrect or negligent handling,
overuse or unsuitable or improper storage. The cost of transport will be borne by the customer
should the equipment be located anywhere other then the customer's premises. In the event of
transport damage, claims under warranty can be accepted subject to using the complete original
packaging and the equipment secured the way it was packed and secured originally. All the
packaging should therefore be retained.
Any warranty claim will be rejected if the equipment is opened by persons not authorized
expressively by ADE to do so.
Customers abroad are kindly requested to contact their local dealer for any warranty claim,
customer service and spare parts.
9
Cleaning and maintenance
M111600-230324-Rev007-UM-de-e