Herunterladen Diese Seite drucken

CImmed 120210 Montageanleitung

Notebookablage

Werbung

BP ID: 120210, 120213, 120338
MONTAGEANLEITUNG
NOTEBOOKABLAGE
ASSEMBLY INSTRUCTION
NOTEBOOK TRAY
WARNHINWEISE
Überprüfen Sie das Gewicht des zu befestigenden ME-Gerätes. Die zulässige
Gewichtsbelastung finden Sie auf dem entsprechenden Produktdatenblatt.
Nichtbeachtung dieser Vorschrift kann zu Geräteschäden oder Verletzung
von Personen führen.
Die CIM med GmbH übernimmt keine Haftung für Schäden, die durch nicht
fachgerechte Montage entstanden sind.
Veränderungen am Produkt, Demontage einzelner Komponenten, Montage
bzw. Zusammenbau der Einzelteile in anderer Form als nachfolgend be-
schrieben, sind nur nach ausdrücklicher und schriftlich erteilter Genehmi-
gung durch die Konstruktionsabteilung der CIM med GmbH zulässig. Für
Schäden, die durch nicht genehmigte Produktänderungen entstehen, über-
nimmt die CIM med GmbH keine Haftung.
Die weiterführende Gebrauchsanweisung und der Inspektionsplan sind für
Endanwender bestimmt.
CIM med GmbH • Euro-Industriepark • Margot-Kalinke-Str. 9 • 80939 Munich • Germany
WARNING
Please check the weight of the ME equipment to be mounted. The permissible
total weight is mentioned on the corresponding data sheet.
Failure to follow these warnings may result in damage to equipment or
injury to people.
CIM med GmbH cannot be held responsible for any damage due to poor
installation.
Product modifications, disassembling and reassembling and/or mounting
any of the components in any other way than described below are permitted
only after written approval by the CIM med GmbH construction and
engineering department. CIM med GmbH cannot be held responsible for
any damage or injury caused by product modifications and/ or amendments
without prior permission from CIM med GmbH.
The additional instructions for use and the inspection plan are intended
for end users.
www.cim-med.com
- 1 -

Werbung

loading

Inhaltszusammenfassung für CImmed 120210

  • Seite 1 BP ID: 120210, 120213, 120338 MONTAGEANLEITUNG NOTEBOOKABLAGE ASSEMBLY INSTRUCTION NOTEBOOK TRAY WARNHINWEISE WARNING Überprüfen Sie das Gewicht des zu befestigenden ME-Gerätes. Die zulässige Please check the weight of the ME equipment to be mounted. The permissible Gewichtsbelastung finden Sie auf dem entsprechenden Produktdatenblatt.
  • Seite 2 NOTEBOOKABLAGE NOTEBOOK TRAY VARIANTEN VERSIONS Höhenverstellbarer Tragarm, Rollständer Tragarm Pivot Height adjustable arm, Cart Support arm Pivot M4x19 M4x19 (4x) (4x) MONTAGESCHRITTE ASSEMBLY STEPS HÖHENVERSTELLBARER TRAGARM HEIGHT ADJUSTABLE ARM Platzieren Sie die Anschlagplatte wie dargestellt Place the stop plate on the support arm as shown. am Tragarm.
  • Seite 3 NOTEBOOKABLAGE NOTEBOOK TRAY MONTAGESCHRITTE ASSEMBLY STEPS ROLLSTÄNDER CART Platzieren Sie die Anschlagplatte wie dargestellt Place the stop plate on the cart as shown. am Rollständer. Befestigen Sie die Notebookablage mittels der (4) Mount the notebook tray with (4) 6 x 19 counter- 6 x 19 Senkkopfschrauben.

Diese Anleitung auch für:

120213120338