Reinigung Und Wartung - Royal Catering Rcks-4 Bedienungsanleitung

DE
VI. REINIGUNG UND WARTUNG
Reinigen Sie die Maschine täglich und gründlich, um Langlebigkeit und Effizienz des Gerätes zu gewährleisten.
Nutzen Sie zur Reinigung warmes Wasser und Seife, Alkohol oder Reinigungsmittel ohne Scheuermittel,
Bleichmittel oder Salzsäure. Benutzen Sie keine Putzmittel wie Stahlwolle oder Stahlbürsten, damit die
Oberfläche des Gerätes nicht beschädigt wird.
4
U S E R M A N U A L
MULTI-CUTTER
I. SAFETLY INSTRUCTIONS
• Do not use the device if it is damaged or defective.
• The device can't be used by persons with physical or mental disabilities or children or persons with
insufficient experience, and/or insufficient knowledge.
• Keep the device away from children
• To prevent injuries, always be careful with the maintenance of the device, particularly with the
maintenance of the blades.
• When cleaning or servicing the device, take all possible hazards, as well as residual risks into
consideration.
• The knives are very sharp – do not touch them!
II. THE CONSTRUCTION OF THE DEVICE
MULTI-CUTTER RCKS-4
III. APPLICATION
Multi-Cutter is intended for cutting fruits and vegetables only.
CAUTION: the product is not suitable for slicing tomatoes.
Any damage resulting from a non-conform use of the device is to be paid by the user!
IV. BEFORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable. The various items used for packaging (cardboard, plastic straps, polyurethane foam)
should be conserved, so that the device can be sent back to the service centre in the best condition in case
of any problems!
V. USE OF THE DEVICE
• Before the first use, the device must be cleaned with a mild detergent.
• Please put the machine on an even place, which is tilt resistant and can support the combined weight of
the machine. Multi – cutter should be assembled to the working surface using screws.
• Pull the lever upward;
• Place the fruit / vegetable in front of the pusher;
• Press the lever strongly, sliced fruit / vegetable will come at the bottom of the device;
• Different shape of sliced fruits / vegetables can be produced by using different kinds of accessory.
Rev. 23.06.2023 Rev. 23.06.2023
1
3
2
4
5
EN
1. the pusher lever
2. the pusher
3. the base wall
4. feet with holes for mounting
5. the base with holes for mounting
5