SSS Siedle CE 600-0 Produktinformation Seite 8

English
Application
Colour CCD video camera external
mounting with automatic day/night
switchover (True Day/Night) and inte-
grated infrared lighting. Horizontal
pick-up angle: appr. 79°–26°
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
• Please read through this product
information carefully before commis-
sioning the camera.
• Never operate the camera outside
the specified limiting temperature,
humidity or voltage values.
• When laying the connecting cable,
ensure that it is not subject to load,
kinked or damaged in any way.
The following installation situations
must be avoided without fail:
• Direct ajour light
• Direct sunlight
• Extremely bright picture back-
ground
• Highly reflective walls on the
opposite side of the door station
• Lamps or direct light sources
Scope of supply
• CE 600-...
• "Easy bracket" fixture
• 4 cross-head screws 5 x 30
• 4 wall plugs D = 6
• 4 Allen screws M4 x 13
• Allen key size 3
• Video SUB-OUT cable
• Connecting plug
• This product information
8
1 Product details
a Housing
b Infrared lighting
c Lens attachment
d Mounting borehole
e Connecting cable
f Wall arm
g Mounting base
h "Easy Bracket" catch
i OSD cover
j Focus setting
k Zoom setting
l "Easy Bracket" hook
m Cable outlet
Safety remarks
• With darkened environment and
direct view into the IR spotlight, a
safety distance of >1 m to the spot-
light must be maintained.
• Do not observe invisible LED beam
directly using optical instruments
(e.g. magnifying glass) as this can
pose a hazard to eyes, LED class 1M.
Mounting
2 Fasten the "Easy Bracket" fixture
on the wall, observing the mounting
position, with the retaining bracket
at the top.
Create the plug-in connection and
suspend the hook at the camera
on the retaining bracket of the wall
fixture. Fasten the camera using 4
Allen screws.
The "Easy Bracket" fixture is not
suitable for ceiling mounting. In this
case, the mounting base is screwed
directly into the ceiling.
3 Adjust the pan and tilt angle.
4 Fix the camera setting using the
provided Allen key.
Setting the zoom and focusing
5 Take off the OSD cover, under
which is the joystick for controlling
the settings. The zoom and focus
can be set directly at the camera.
Other settings
Other camera settings can be car-
ried out using an OSD (On-Screen-
Display) menu. To carry out these
settings, the video signal of the
camera must be connected to a
monitor. The camera menu can be
seen on the monitor. The adjustable
menu points are described on the
next two pages.
Terminal assignment
+, – Supply voltage
20–50 V DC
L/S Coaxial connection
L = lead, S = shield
RS485+, Data lines
RS485–
Warning!
This is a class A device. This device
may cause radio interference in
domestic environments. In this case,
the operator may be required to take
adequate measures.
Specifications
Colour system: PAL
Image pick-up: Colour CCD sensor
1/3";976 (H) x 582 (V) 568,000 pixel
Lens: 2.8 – 10 mm
Pick-up angle:
horizontal appr. 79° - 26°
Light sensitivity: 0.003 Lux at F 1.4
Day/night switchover Automatic
Infrared lighting: Integrated
Resolution: 750 TV lines horizontal
Video output: 1 Vss FBAS at 75 Ohm
Operating voltage: 20–50 V DC
Operating current: max. 250 mA
Protection system: IP 67
Ambient temperature:
–20 °C to +50 °C
Dimensions (mm) W x H x D:
75.3 x 69 x 218.5
Care instructions
Clean the camera shade using a
soft scratch-proof cloth (such as
a glasses cleaning cloth, furniture
polishing duster or similar) soaked in
a mild soap solution. To ensure that
no stains or discoloration occur, the
cleaning agent must be rinsed off
leaving no residues.