Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION INSTRUCTIONS
USAGE
This pick-up-system is recommended for OMNITRONIC BD-1550, DD-2220, DD-2250, DD-4220, DD-4250
DELIVERY
The delivery includes the pick-up-system with stylus cover, 2 fixation screws, 2 nuts and 2 washers.
INSTALLING/EXCHANGING THE PICK-UP SYSTEM
If you are exchanging the system, loosen the tightening screws on the headshell and remove the connection-
cables of the pick-up system. Remove the old pick-up system from the Headshell.
Put the stylus cover on the stylus.
Connect the Headshell's connection cables with the terminals of the pickup-system and make sure that the
occupation of the cables is correct.
The different colours mean:
Pin-No.:
Used colour:
1
White (L+)
2
Blue (L-)
3
Red (R+)
4
Green (L-)
S-15
Pick-up-system
Channel and poles:
Left, plus-pole
Left, minus-pole
Right, plus-pole
Right, minus-pole
After connecting the connection cables fix the system with the
enclosed screws under the Headshell.
Balance the tone-arm and adjust the stylus pressure/Anti-Skating
(recommended stylus pressure 2.5 g )
TECHNICAL SPECIFICATIONS
Weight:
Frequency response:
Recommended tracking force:
Output voltage:
Terminal resistance:
+
1
3
L
R
2
-
4
5 g
20 - 20,000 Hz
30 mN
5 mV
47 kOhm
Werbung
