LD Systems LDCURV500DB Kurzanleitung

USER´S MANUAL LDCURV500DB
Adjustable Distance Bar for CURV 500
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when mounting the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach
/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
FEATURES
Custom CURV 500 distance bar
Made of steel with steel collar and safety pin
Maximum length 136.5 cm
Transport length 58 cm only
INTRODUCTION
Customized to mount CURV 500 satellites attached to the SmartLink adapter on subwoofers, the CURV 500 distance
bar is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety
pin for secure height adjustment. The base tube can be disassembled for a transport length of 58 cm only.
OPERATION
Place the tube into the desired height and then gently fix the clamp by locking knob
Insert the locking pin
Always insert the safety pin to secure the height adjustment!
Tighten the clamp again by hand - not too tight – then place the speaker on the secured tripod.
SPECIFICATIONS
Model number:
Product Type:
Tube material:
Tube colour:
Tube surface:
Min. height:
Max. height:
Transport length:
Height-adjustable:
Type of height adjustment:
Material of height adjustment:
Lower Connector:
Weight:
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
B
, slightly loosen the clamp and lower the pipe until it rests on the locking pin - Caution:
LDCURV500DB
Distance bar
steel
black
powder-coated
1015 mm
1365 mm
580 mm
yes
Clamp with safety pin
steel
M20
1.93 kg
B
EN
A
.
A