LD Systems CURV 500 TMB Bedienungsanleitung

USER´S MANUAL
CURV 500 TMB
TRUSS CLAMP FOR CURV 500
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when mounting the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
11. On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition
to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/
pdf/Manufacturers-Declarations-LDSYSTEMS_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Anspach
/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
SATELLITES
®
FEATURES
CURV 500 satellite truss mount set
Clamps to trusses and crossbars
Tough black powder coating finish
Includes Eyebolt M6x12 mm and washer
INTRODUCTION
The LD Systems CURV 500 truss mount set is custom designed to mate with the CURV 500 SmartLink adapter. Made
of powder-coated aluminium, it clamps the adapter and satellite assembly to trusses or crossbars. The set includes a
eyebolt to secure the CURV satellites attached to the adapter in accordance with BGV C1.
SPECIFICATIONS
Model number:
Product type
Material
Surface
Colour
Max. load
Weight
Additional information
Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
EN
LDCURV500TMB
clamp for truss
aluminium
powder coated
black
20 kg
0.5 kg
Eyebolt M6x12 mm including washer