Herunterladen Diese Seite drucken

Hansa LED Saturn Gebrauchsanleitung Seite 7

Led-leuchte

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
OPERATING INSTRUCTIONS
LED lamp LED Saturn
– Never pull the mains cord out of the sock-
et by the cord, instead always take hold of
the mains plug.
– Never use the connector cord as a carry-
ing strap.
– If the mains cord of this device is dam-
aged, it must be replaced by the man-
ufacturer or its customer service
department or a person with similar quali-
fications in order to avoid risks.
– Render the device, which has outlived its
purpose, unusable. Pull the mains cord
out of the socket and cut the mains cord
in half.
WARNING
Danger to children and
other persons!
Children often do not recognise
the risks of handling electric appliances
or underestimate them. Children can be-
come trapped in the packing film when
playing and suffocate.
– Do not allow children to play with the
packing film and never allow them to use
electric appliances without supervision.
CAUTION
Fire hazard!
Do not use any sprays or the like
to clean the light.
– Do not cover the light head with cloths or
the like. The heat radiated from the light
could cause them to catch fire.
Notes on the place of installation
• Set up the light on a solid, level surface
(e. g. table or sideboard) close to a socket.
• Make sure that there is no risk of it tipping
and that the cord does not pose a trip
hazard.
Turning the light on/off
1. Insert the plug in a socket.
2. Arrange the light in the desired position.
3. Set the On/Off switch to I.
4. Set the On/Off switch to O to turn off the
light.
GB
Replacing the bulb
• Bulb service life: 30 000 hours
• The bulb cannot be replaced.
Care and cleaning
WARNING
Hazardous grid voltage!
Risk of electric shock!
Improper use could result in
electric shock.
– When cleaning the light, always pull the
mains plug out of the socket. When doing
so, always take hold of the plug and not
the cord.
– Make sure that no water penetrates the
inside of the light or other parts carrying a
current.
– Carefully wipe off the light with a damp
cloth or a dry dust cloth.
Technical data
Voltage:
Bulb:
Protection class:
Model number:
Distribution
Styro GmbH
Industriestrasse 2
D-91583 Schillingsfürst
Tel.: +49 (0)9868 989490
www.styro.de
Spichtig AG
Frauholzstrasse 27
CH-6422 Steinen
Tel.: +41 (0)41 833 80 10
www.styro.ch
100 – 240 V AC
LED 5 W
II
41-5010.644
7

Werbung

loading

Diese Anleitung auch für:

41-5010.644