cherubini PLUG&PLAY SHORT Einstellanleitungen Seite 20

MOTOR ACTIONS AT LIMIT SWITCH STOPS AND OBSTACLES
P&P Plus Ø 35
P&P Plus Ø 35 V43
Wave Wire
P&P Short
(Until 12/2017)
P&P Short
(Starting from 01/2018)
After the limit switches have been set, the motors act differently when they reach the
mechanical stop or if there is an obstacle.
EU DECLARATION OF CONFORMITY
CHERUBINI S.p.A. declares that the product is in conformity with the relevant Union
harmonisation legislation:
Directive 2014/35/EU
Directive 2014/30/EU
Directive 2011/65/EU
The full text of the EU declaration of conformity is available upon request at the
following website: www.cherubini.it.
LIMIT SWITCH STOPS
(blinds with stoppers and/or
stiff fixing springs, or cassette
awnings).
It always goes to the stop and
reverses direction to release
tension.
It always goes to the stop and
DOES NOT reverse direction to
release tension.
It always goes to the stop and
reverses direction to release
tension.
OBSTACLE DETECTION
WHEN ASCENDING AND
DESCENDING
(only when descending for
blinds with stiff fixing springs).
P&P Plus Ø 35 it stops and
reverses direction for 1/3 of
the travel.
P&P Plus Ø 35 V43 it stops
and does not reverse direction.
It stops and does not reverse
direction.
It stops and reverses direction
to release tension.
20