Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TROUBLESHOOTING
STORAGE
•
Store the device and any accessories in a dry, well ventilated place.
•
In case of longer periods without operation, protect the LEDs and its accessories against soiling and
corrosion.
TRANSPORT
•
Use the original packaging to ship whenever possible.
TROUBLESHOOTING
If something stops working...
DANGER! Improper repairs can result in the product functioning unsafely. This endangers yourself and
your environment.
DANGER! All work to eliminate possible faults should be carried out with the fuse switched off. All work
should be carried out by a qualified electrician.
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself. Please consult the
following table before contacting the vendor for further assistance.
Fault/malfunction
The LED lights do not
light up
There is a break in the
LED strip where the lights
in an isolated section are
absent but the rest of the
strip is lit up.
If you can't fix the fault yourself, contact X Rocker support. Please be aware that any improper repairs will also
invalidate the warranty and additional costs may be incurred.
IMPORTANT: You must keep your original retail receipt as proof of purchase.
DISPOSAL AND RECYCLING
A crossed-out wheelie bin icon means: Batteries and rechargeable batteries, electrical or electronic
devices must not be disposed of with household waste as they may contain substances that are harmful
to the environment and human health.
Consumers must dispose of waste electrical devices, spent portable batteries and rechargeable
batteries separately from household waste at an official collection point to ensure that these items are
processed correctly.
The packaging consists of cardboard and marked plastics that can be recycled. Take these materials to
a recycling centre.
Cause
No mains voltage?
Light source defective?
LED Lights switched on via switch?
Switch defective?
Connection cable defective?
LED strip temporarily defective
Need Help? Contact X Rocker at :
www.xrockeruk.com/pages/support
Remedy
Check fuse. Contact an electrician.
Contact the vendor for support.
Contact the vendor for support.
Contact the vendor for support.
Contact the vendor for support.
Step one - press the "IC Set"
button on the remote control.
Step two - press upwards arrow
button on the remote control to
increase the LED chain length.
EN
18
Werbung
