Winntec Smart Disc Benutzerhandbuch Seite 3

When Moving Wheels from a Rack or Vehicle
1. Lift wheel assembly by hand and place it on the top of a smart disc.
2. Place the second wheel assembly right on top of the first wheel assembly.
3. Continue to pile up the wheel assembly up to the 4 layers at maximum.
4. Move the loaded wheel disc to storage location.
5. Discharge the wheel assemblies from smart disc one by one.
6. Watch the floor condition carefully to avoid any accident.
When Resting the Smart Disc for Storage
1. Lift a smart disc by hand and place it on the top of another smart disc.
Adjust 4 casters which located on top of smart disc and ensure 4 casters
all fall in the recess area of wheel retainers which pre-installed on the
lower smart disc.
2. Continue to pile up the smart discs up to 10 pieces at maximum.
3. Move the stacked smart discs to storage location.
4. Watch the floor condition carefully to avoid any accident.
Instructions for Use
(English)