Hisense HCG1600DBT Bedienungsanleitung Seite 47

Instructions for removing and assembling the plates
1. Removing the plate. Open the upper and lower plates of the machine at 95°(or 180°). Press the button
to release the plate and the plate will automatically spring up. At this point, the user can directly
remove the plate from the fixed bracket, as shown in the figure below.
Attention:
• While the upper baking tray is in the upright position, hold the plate with your hand when pressing the
plate release button of the upper plate so as to stop it from falling.
• When baking is finished and the plates are still hot, do not take out the plates immediately. To avoid
burns, wait until the plates have cooled.
2. Assemble the plates, open the upper and lower plates of the machine at 95° (or 180°), insert the two
ends of the plates with notches into the fixing bracket of the plate, then place the plate on the reflecting
tray. Press down on the plate until you hear a "click" sound. The plate is assembled, as shown in the
figure below.
Attention:
• The plate is a necessary part of this product. It must be installed before the machine is used.
45