Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Insert the micro SIM card into the slot located under the device;
Connect the power adapter to the DC jack;
Open
https://192.168.88.1
User name: admin and there is no password (or, for some models, check user and wireless
passwords on the sticker);
Update the device by clicking the (Check_for_updates) on the right side and updating your RouterOS
software to the latest version. Must have a valid SIM card inserted;
To manually update the device, please go to
Choose v7 (ARM) packages for this device and download them to your PC;
Upload downloaded packages to the (WebFig) (Files) menu and reboot the device;
Updating your RouterOS software to the latest version will ensure the best performance, stability, and
security updates;
In the (QuickSet) menu set up the following: Choose your country, to apply country regulation settings;
Set up your wireless network password in the left field;
Set up your router password in the bottom field.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
We cannot guarantee that there will be no accidents or damage if the device is used inappropriately.
Please use this product with care and operate at your own risk!
The socket-outlet shall be installed near the equipment and shall be easily accessible.
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
in your web browser to start the configuration;
https://mikrotik.com/download
Werbung
