SOUNDMASTER IR43DAB Bedienungsanleitung Seite 60

The time and date can be updated manually or automatically from DAB, FM or network.
Auto-update works with data sent over DAB, FM or the Internet. The clock is only
updated when it is in a corresponding mode, so it is suggested to select a mode you use
regularly.
DAB and FM use time signals broadcast with radio transmissions. Network uses a time
signal sent from the Internet radio portal when in any network-connected mode.
Time zone/daylight
Set your time zone. If you country uses daylight saving and it is in effect, turn on the
Daylight savings option.
Manual update
If you set No update, the wizard prompts you to set the time and date manually. The
date and time are displayed as dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the navigate reel or
/
continue setting with next value.
Network
Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity: Most of Europe
Scanning for the network
IR43DAB is compatible with all common network protocols and encryption methods. It
searches for the available networks and list them out for you choose.
There will be hints for the type of network – if you plug the LAN cable, it will show one network
of [wired]; if your network device supports WPS function, it will be [WPS] before the SSID (the
name of network device). Select the one you want to connect.
12
All manuals and user guides at all-guides.com
on the remote control. Once the value is set, press
IR43DAB / English Manual
to