Clay Paky A.LEDA WASH K10 C61405 Bedienungsanleitung Seite 23

NOTE: On conclusion of resetting in case of absence of DMX signal, Pan & Tilt move to the Home position (Pan 50% - Tilt 50%) all the others channels stay at 0%.
• RED – GREEN - BLUE - WHITE
• RED FINE – GREEN FINE – BLUE FINE – WHITE FINE
• C.T.O.
Note: If CTO channel is active, the WHITE channel is disabled.
• MACRO COLOUR
A LEDA WASH
BIT % EFFECT
255 100 COLOUR INSERTED
0 0.0 COLOUR EXCLUDED
BIT % EFFECT
255 100
0 0.0
BIT % EFFECT
255 100 2700 ° K
238 93,2 3000 ° K
209 82,0 3500 ° K
181 71,0 4000 ° K
152 59,5 4500 ° K
124 48,7 5000 ° K
5500 ° K
95 37,0
67 26,2 6000 ° K
38 14,7 6500 ° K
10 4,0 7000 ° K
0-9 0,0-3,7 CTO OFF
• STOP / STROBE
• DIMMER
• DIMMER FINE
23
BIT % EFFECT
252 - 255 98.7 - 100 OPEN
239 - 251 93.7 - 98.2 RANDOM FAST STROBE
226 - 238 88.7 - 93.2 RANDOM MEDIUM STROBE
83.7 - 88.2 RANDOM SLOW STROBE
213 - 225
208 - 212 81.7 - 83.2 OPEN
207 81.2 FAST PULSATION
108 42.5 SLOW PULSATION
104 - 107 41.0 - 42.0 OPEN
103 40.5 FAST STROBE (12 flash/sec)
4 1.7 SLOW STROBE (1 flash/sec)
CLOSED
0 - 3 0.0 - 1.2
BIT % EFFECT
255 100 FULL LIGHT
0 0.0 NO LIGHT
BIT % EFFECT
255 100
0 0.0
eiter