SIXTOL SX3042 Gebrauchsanweisung Seite 3

EN
Safety notice
This tool is intended for permanent creative burning into
different materials (mainly wood, leather or cork).
The product can also be used for soldering jobs.
Please use only certified soldering wire (tin, lead) to avoid
unwanted damage.
It is strictly prohibited to use knives or hammers to trim the
soldering iron tip.
When cleaning the device, always turn off the power and
clean the tip with a damp sponge or cloth.
If the power cord is damaged, it must be replaced with a
suitable cord available from the manufacturer or after-sales
service.
When a new electric soldering iron is used for the first time,
a slight smoke may come out due to the electric heating
element being energized and heated. This is a normal
phenomenon, and the smoke will disappear after a few
minutes.
It must be placed on its stand when not in use.
It is strictly forbidden to disassemble the electric parts of
the heater.
The front end of the product will become very hot during
operation which may cause serious burns. Hold the product
only by the handle.
It is intended for indoor use only. Never use this device
outside as moisture ca cause damage to the device and
injury to the user.
Never touch this product with wet hands.
Do not use the product on persons or animals.
Unplug the power plug from the mains socket if you do not
use the device for an extended period of time.
The device is not a toy and it is not intended for children.
Keep away from children!
2