SIXTOL SX3042 Gebrauchsanweisung Seite 2

EN EN
Instructions for use
Technical parameters
Rated power: 30 W
Rated voltage: 220-230 V / AC
Rated frequency: 50 Hz
Temperature range: 350 - 450 °C
Use for soldering
Before use, clean the parts that need to be welded.
Put the electric soldering iron on the stand, turn on the
power and preheat for about 2 minutes before use.
Once the use temperature is reached, immerse the
soldering iron tip in the solder flux to prevent oxidation of
the tip.
Put the soldering iron tip on the seam to melt it and use a
solder suction device to remove the melted parts.
Use the tip to melt the welding wire on the two objects to be
welded to weld them.
In order not to compromise the effectiveness of use, clean
the excess debris with a damp sponge.
After using the electric soldering iron, cut off the power, put
it on the stand, and wait for it to cool down before storing it.
1