Hama BSH-150 Handbuch Seite 8

00057186bda 24.03.2006 8:03 Uhr Seite 16
7). System now is connecting to the headset.
8). The headset provides two different services -
Audio Sink and Headset. Users are recommended
to setup both of them. First, setup the Audio Sink
service. Select "Audio Sink" item and click "Next".
9). You will be required to enter a passkey. The default
passkey is "1234".
10). A "Digital Signature Requiring" may appear. Click
"Yes" to continue the installation.
11). Enter a name for the stereo headset or click "Next"
to use the default name.
12). Now the pairing process has completed. Please
click "Finish".
13). An icon "BSH-150" should appear if pairing is 17). Now the pairing process has completed. Please
succeeded.
14). Repeat the pairing procedure 2 ~ 6 to setup 18). An icon "BSH-150 (1)" will be added after the
Headset service. Select "Headset" item and click
"Next".
19). Right click the Bluetooth icon on the task bar and
15). Users will hear a signal reception tone from the
stereo headset. Press the "Answer" button to
establish a connection.
20). Make sure the item "AV Remote Control Service" is
16). Enter a name for the stereo Headset or click "Next"
to use the default name.
Note: AV Remote Control Service is required in order to
use track control on the Stereo headset.
click "Finish".
pairing process is completed.
select "Service Properties..."
checked and then click "OK". Stereo Audio (Audio
Sink) & Headset Services