Installation
Electric shock
▪
Disconnect the mains voltage or mains plug before starting work.
▪
Make sure that the type of electrical installation does not reduce the protection against electric shock
(protection class, protective insulation).
▪
Make sure that the cable is not bent excessively or crushed.
Non-compliance with these instructions will result in serious or fatal injury.
Cleaning and care
Electric shock
▪
Disconnect the mains voltage or mains plug before starting work.
▪
Make sure that no moisture from gets into connection compartments or on live parts.
Non-compliance with these instructions will result in serious or fatal injury.
Damage to the product
▪
Do not use any solvents for cleaning.
Non-compliance with this instruction can cause damage to property.
▪
Use a soft, dry cloth for cleaning.
▪
In case of severe soiling, use a soft and slightly damp cloth to clean the product.
Repairs and spare parts
Unsuitable parts
▪
Use original spare parts and accessories from the manufacturer only.
Non-compliance with this instruction can cause damage to property.
In case of complaint, contact your responsible specialist dealer or contact our service hotline directly.
▪
Telephone number: +49 (0)7947 9100-0
▪
E-mail: info@naeve.de
For technical questions, please state the seven-digit item number as well as the five-digit order number (for example
1234567 / 16999). The order number can be found on the type plate.
1259142_Manual_16870_03_V1.docx
DANGER
DANGER
NOTE
NOTE
9 / 38