Herunterladen Diese Seite drucken

Real-Time Clock - REPTIL'US DTH Control Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DTH Control:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Press SET key to display the default humidity value while icon ​ D IFFERENCE ​ f lashing, then press UP or DOWN key to adjust the ideal humidity
difference you want.
10. ALARM (for humidity):
Press SET key to display the default humidity value while icon ​ A LARM ​ f lashing, then press UP or DOWN key to adjust the ideal humidity alarm
difference you want.
11. REAL-TIME CLOCK: (please refer to the right side picture)
Press SET key to display the default hour value while hour flashing, then press UP or DOWN key to adjust the
ideal hour you want.
Press SET key to display the default minute value while minute flashing, then press UP or DOWN key to adjust the
ideal minute you want. Please refer to
12. Day start time: (please refer to the right side picture)
Press SET key to display the default hour value while
you want.
13. Night start time: (please refer to the right side picture)
Press SET key to display the default hour value while
adjust the ideal ​ N ight start time​ hour you want.
Remark:
1. If current menu don't need adjustment, press​ SET​ key directly to switch to next parameter, press ​ S ET​ key for 3 seconds to save and exit
setting mode.
2. The controller will return to normal working condition automatically without any key operation in 15 seconds.
3. Parameter adjustment: Press UP and DOWN key for more than 3 seconds, enter into quickly adjusting state.
Controlling function:
Cooling: (in COOL mode)
A.
Cooling systems works in below situation:
The measuring temperature ≥ the set temperature + the temperature difference
i.
ii.
Cooling system works delay 1minute: compressor delay
B.
Cooling systems stop working in below situation:
The measuring temperature ≤ the set temperature
Heating: (in HEAT mode)
A.
Heating systems works in below situation:
The measuring temperature ≤ the set temperature - the temperature difference;
B.
Heating systems stop working in below situation:
The measuring temperature ≥ the set temperature
Dehumidification: (in DEHUMI mode)
Dehumidification systems works if the measuring humidity ≥ the set humidity + the humidity difference
C.
Dehumidification systems stop working if the measuring humidity ≤ the set humidity
D.
Humidification: (in HUMI mode)
Humidification systems works if the measuring humidity ≤ the set humidity - the humidity difference;
C.
Humidification systems stop working if the measuring humidity ≥ the set humidity
D.
Alarm:
Buzzer sounds in alarming status and alarm icon flashes in below situation:
A.
the measuring temperature > the set temperature +the temperature alarming difference
Rapid flash with up arrow: high temp alarm
B.
the measuring temperature < the set temperature – the temperature alarming difference
Rapid flash with down arrow: low temp alarm
C.
the measuring humidity > the set humidity +the humidity alarming difference
Rapid flash with up arrow: high humidity alarm
D.
the measuring humidity < the set humidity – the humidity alarming difference
Rapid flash with down arrow: low humidity alarm
Le agradecemos haya comprado uno de nuestros artículos Reptil'us, esperamos que le satisfaga y cumpla todas sus
Instrucciones de uso:
El thermostat hygrostat DTH Control de la marca Reptil'us combina la regulación de la temperatura y la de la humedad. Se usa mucho en el
mercado de los incubadoras y en lugares donde sea necesario controlar la temperatura y la humedad.
Un programa permite el control de la temperatura y otro el de la humedad.
Características : :
1. Gran pantalla LCD, fácil de manejar, de leer y de usar, los parámetros son fáciles de definir.
2. Permite controlar los parámetros noche y día de la humedad y temperatura separadamente.
3. Backlit provoca un corte automático de la luz después de 10 minutos sin realizar ninguna operación.
4. Pequeño y elegante , podrá elegir colocarlo en el cristal o ponerlo encima de la mesa o instalarlo en el acuario o terrario, según lo desee.
and hour flashing, then press UP or DOWN key to adjust the ideal ​ D ay start time hour
and hour flashing, then press UP or DOWN key to
TERMOSTATO-HIGROSTATO DTH Control
expectativas.
4

Werbung

loading