Compac CC10 Bedienungsanleitung Seite 3

Maintenance:
At normal use all mechanical/moving parts only requires a monthly lubrication to be maintained.
The pins must be greased every three months. Important! Use only oil or grease free from acid.
An annual inspection must be performed by a skilled person. Every eventually weared out or
defective part must be replaced with original spareparts. The owner and- or user must take precau-
tions that repair is made by a skilled person. Before every use the operator must take precautions
that there are no visible faults such as leaks, damage of the crane and loose or missing parts. In
case the operator suspects that the crane has been overloaded or wrongly loaded it must before
further use be inspected by a skilled person or an authorized workshop.
Oilquantity: 0.8 litre. DO NOT use brake fluid or motor oil !
In case the hydraulic unit has a lack of oil or has been taken apart in order to replace the seals then
fill up to the correct oil quantity. Activate the pump handle and add oil slowly through the filling hole
at plug B. Warning! to much oil quantity might cause problems to the hydraulic system. Please
note! Use only hydraulic oil with a gradation (viscosity) of ISO32 (CASTROL HYSPIN AWS 32 or
equivalent)
Decommissioning:
If the crane should ever be scrapped, draw off the oil into an approved container and dispose it at
an approved authority.
1.1.31018.1/1-(ENG)UDG1
2007.03.20