Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Computer Instruction
Body fat operation:
a. Under ready status, press MODE key until BODYFAT window twinkles, press ENTER to enter
gender setting.
b. Gender setting: the LCD shows "MAN" or last set gender, Press "+/ -" to choose: "MAN",
"WOMAN", Press "ENTER" to set weight.
c. Weight (25-200KG), The LCD will twinkle and show 60 (KG), Press "+/ -" to choose your weight.
Press "ENTER" to set height.
d. Height (100-220CM), The LCD will twinkle and show 165 (CM), Press "+/ -" to choose your Height.
Press "ENTER" to set age.
e. Age (8-65), The LCD will twinkle and show 25, Press "+/ -" to choose your age. Press "ENTER"
to set body fat test.
f. After all setting, The LCD will twinkle and then hold both of your hands on the hand pulse to test
your body fat. The LCD will show your body fat when test is finished, or it will show "-----" if it's
failed. The computer will choose the appropriate program for you after processing the data.
You can press "Body Fat" to quit the test during operation and return to ready status.
g. Press "start/stop" to quit setting.
h. Taking Asian measure: body fat under 19 is thin; between 19 and 24 is realistic weight;
between 24 and 27 is overweight; over 27 is obese.
Pulse testing: In non-exercise status, hold both of your hands on the pulse sensors, the LCD will
show the index, the heart shape light will show the pulse twinkling.
Malfunction:
Computer's indication for the malfunction of speed /incline sensor:
A. Er01: Speed failure. After the treadmill starts, if there is any speed malfunction, it will stop after
running for 6 seconds. Computer will back to ready status and time window shows "Er01".
Any operation for the computer will be wasted.
B. Er02: Overload current failure. After the treadmill starts, if there are overload current in the
motor, it will stop and time window shows "Er02".
C. Er03: Correspond failure. When computer and driver fail to correspond, the time window
shows "Er03".
D. Er04: Current source failure. When there is failure of the current source in the driver, the time
window shows "Er04".
E. incline failure: if the computer doesn't detect incline, incline window will show "--".
You can press incline +/- keys to control incline.
8
Werbung
