Seite 1
1. Please use the card to measure hole position correctly and drill 3 holes. 2. Fix 3 expansion plugs into the holes. 3. Fix 3 screws into the explansion plugs with a spare space. 4. Insert the notch to the lower screw and fasten the whole lamp well. 5.
Seite 2
Installation Height Installation height ≤4m Detection Area ≤10 m Pls press the Button to adjust to different working mode: Press 2nd time for Mode B. Press 1st time for Mode A. Press 3rd time for Mode C. Press 4th time for off. Mode A: Automatically turns on at the dusk (<30lux) and remains 20%...
Seite 3
Einbau GERMAN GEBRAUCHSANWEISUNG Schaltfläche Ausklinkung 1. Bitte verwenden Sie die Karte, um die Position der Löcher korrekt zu messen und 3 Löcher zu bohren. 2. Befestigen Sie 3 Spreizdübel in den Löchern. 3. Befestigen Sie 3 Schrauben in den Spreizdübeln mit einem freien Platz.
Seite 4
Spezifikation Arbeitsmodi Installation Height Leistung/Lumen Installation LEDs height ≤4m Li_Ion Akku Detection Area ≤10 m Sonnenkollektor Bitte drücken Sie die Taste, um den Arbeitsmodus zu ändern 3 verschiedene Beleuchtungsmodi Arbeitsmodus Drücken Sie 1. Mal für Modus A Drücken Sie 2. Mal für Modus B Drücken Sie 3 Mal für Modus C Zum Ausschalten 4.