Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
4. Technical data
Motor power supply .................................. 18 Vdr.
Sanding surface ..................................Ø 225 mm
Idling speed .................................600-1200 min
Weight: .....................................................2.36 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L
sound pressure level ..................... 86.3 dB(A)
pA
K
uncertainty ............................................. 3 dB
pA
L
sound power level ....................... 94.3 dB(A)
WA
K
uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Anl_TP_DWS_18_225_Li_BL_SPK13.indb 17
Anl_TP_DWS_18_225_Li_BL_SPK13.indb 17
-1
< 2.5 m/s
2
h,DS
2
- 17 -
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Warning!
Always remove the battery pack before making
adjustments to the equipment.
5.1 Dust extraction
Important!
Connect the adapter to a dust extraction system
or a vacuum cleaner. This will provide excellent
extraction of chips and dust.
5.1.1 Connecting the dust extractor adapter
for an external dust extraction system
(Fig. 2 / Item 10)
1. Push the dust extractor adapter (10) onto the
dust extractor connection (a) as shown in Fig.
2 and lock it by twisting clockwise.
2. Now connect a suitable dust extraction sys-
tem (b) to the dust extractor adapter (10).
5.1.2 Connecting the dust extractor hose
(Fig. 4 / Item 12)
1. Push the dust extractor hose (12) onto the
dust extractor connection (a) as shown in Fig.
4 and lock it by twisting clockwise.
27.06.2023 15:15:18
27.06.2023 15:15:18
Werbung
