Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Flush mount enclosure
The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP into a ceiling. They are available for all
HEATSTRIP Elegance models, and are supplied as a one-piece unit suitable for mounting individual heaters. Flush
mounting can be used with plaster or timber lined ceiling materials.
An ideal mounting height is 2.3m-2.5m, with a maximum ceiling height of 2.7m in an outdoor enclosed environment.
Maximum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.
A minimum clearance of 50mm behind the enclosure must be provided.
The enclosure is manufactured from powder coated steel.
Please refer to the Flush Mount Enclosure Installation Manual for more detailed installation information.
SUITABLE FOR
PART No
MODEL
THE 1800
THEAC-040
THE 2400
THEAC-041
THE 3600
THEAC-042
HOLE CUTOUT
DIMENSIONS (mm)
1030 x 240
1260 x 240
1860 x 240
OVERALL
DIMENSIONS (mm)
1080 x 290 x 125
1310 x 290 x 125
1910 x 290 x 125
WEIGHT
(kg)
6
8
9
15
Werbung
