Quax SUNNY 54 03 53 3D Serie Handbuch Seite 39

SUNNY
54 03 53xx-3D
Step 6 : Use the upper crossbar 3 of step 1, the right side 2R of step 2, the parts of step 3 and twelve ec-
centrics D
Insert seven eccentrics (D) into the drillings at the innerside of the right side. Insert three eccentrics (D)
into the drillings of the bottom. Insert one eccentric (D) into the drilling at the backside of the rear leg. Push
the construction over the connectors of the side and tighten the eccentrics. Insert one eccentric (D) into
the drilling of the upper crossbar (3). Push the crossbar over the connector of the side and tighten the ec-
centric.
Step 7 : Use the left side 2L of step 2, the parts of step 6, both backs 4, the connecting profi le 13 and fi ve
eccentrics D
Slide a back (4) in the slots of the rear leg and the upper crossbar. Next the connection profi le (13) and
the remaining back. Insert three eccentrics (D) into the drillings underneath the bottom. Insert one eccen-
tric (D) into the drilling at the bottom of the rear leg. Insert one eccentric (D) into the drilling of the upper
crossbar (3). Push the left side (2L) with its connectors into the holes of the construction and tighten the
eccentrics. Insert seven eccentrics (D) into the drillings at the innerside of the left side.
Commode met drie laden
Kommode mit drei Schubladen
Commode avec trois tiroirs
Chest of three drawers
Quax
First dreams
®
First steps
39