Miscea CLASSIC Wartungsanleitung Seite 3

1. CLEANING THE SOAPBOX
Use Foam Glove to clean and disinfectant the
surface of the soapbox. Remove any visible soap
residue.
Press the blue LED button on the waterbox to
activate priming mode. The blue LED light will
start blinking.
Remove any liquid from the soap dispenser tube
by selecting the soap and "-" sectors at the same
time. After 45 seconds the pump will stop
automatically.
Select the disinfect and "+" sectors at the same
time to remove any remaining liquid from the
disinfectant dispenser tube. After 45 seconds the
pump will stop automatically.
2 V 16.01
7