Deltaco Gaming DM410 Benutzerhandbuch Seite 6

ENG
1. Configure mouse buttons
2. Macro editor
3. Choose profile
4. Apply/save changes
5. Restore changes
6. DPI settings
7. LED mode settings
8. Mouse settings
9. USB polling rate settings
1. Left mouse button
2. Forward button
3. Back button
4. Right mouse button
5. Mouse scroll wheel and button
6. DPI button
1.
2.
3.
6
Software
Download the software from
deltaco.se. From the product's page.
Button combinations
Scroll wheel + right click to
change LED mode.
Press and hold the DPI button for
3 seconds to turn the LED light
on or off.
Each press on the DPI button
increases the DPI. The DPI ranges
from 400 to 5000. The DPI button
will respond by flashing the LEDs
when it has been pressed. The DPI
settings can be configured in the
software.
400 DPI - RED LED flashes 3 times
800 DPI - BLUE LED flashes 3 times
1200 DPI - Green LED flashes 3 times
1600 DPI - Yellow LED flashes 3 times
3200 DPI - Cyan LED flashes 3 times
4.
5000 DPI - Purple LED flashes 3 times
5.
Software settings
To change the settings of the
6.
LED modes, DPI, polling rate and
mouse you need to use the soft-
ware.
Support
More product information can be
found at www.deltaco.eu.
Contact us by e-mail:
help@deltaco.eu.