Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Parts & features of the device
Food presser
1
Lid with loading shaft
2
Grate filter net
3
Middle ring
4
Handle
5
Pulp / mash container
6
Juicer base
7
Control knob
8
Anti-slip feet
9
Juice container
10
First use
• Remove the device and accessories from the box. Remove any stickers, protective film or plastic from the
device.
• Before you use the device for the first time, clean the base
• Clean the food presser
and juice container
6
not clean the juicer base
• Thoroughly dry the device and accessories.
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these damage the
device.
• Before connecting the device to the mains power, make sure the control knob
mount the accessories on the juicer base
• Connect the device to the mains power.
• NOTE! When using the device for the first time, a slight odour might occur, this is normal. The odour will
disappear after a few minutes. Ensure adequate ventilation.
Power ON/OFF
• Before connecting the device to the mains power, make sure that the accessories are securely mounted on
the juicer base
7
• Switch off the device by setting the control knob
• When finished using the device, remove the power plug from the mains power.
Using the device
• Before each use, make sure the device is clean and dry.
• WARNING! Before installing or removing the accessories of the device, make sure the rotating
parts have reached standstill, and the power plug has been removed from the mains power!
• Before connecting the device to the mains power, make sure that the accessories are securely mounted on
the juicer base
7
• When mounting the accessories, make sure the handle
the middle ring
4
filter net onto the juicer base.
• Place the lid with loading shaft
up and place the handle over the lid with loading shaft
5
with loading shaft.
• NOTE! The device will only operate when the handle is correctly placed and secured on the bulges of
the lid with loading shaft.
• WARNING! The motor of the device will automatically switch off when the handle of the juicer base
EN 04
, lid with loading shaft
1
in warm water and washing-up liquid. After cleaning, rinse them with tap water. Do
10
in water or any other liquid.
7
and the control knob
8
and the control knob
8
, mount the grate filter net
on the juicer base
7
onto the middle ring (grate filter net placed on juicer base). Tilt the handle
2
6
7
with a damp cloth.
7
, grate filter net
2
.
7
is in the "0" position.
to the "0" position.
8
is in the "0" position.
of the juicer base
5
, until the handle is secured on the bulges of the lid
2
1
2
3
4
5
8
10
9
, middle ring
, pulp / mash container
3
4
is in the "0" position and
8
is tilted forward. Then place
7
onto the middle ring
3
and push the grate
4
Werbung
