Cudy RE1200 Benutzerhandbuch Seite 7

3. Relocate the extender halfway between your router and the Wi-Fi dead zone,
find a good place to plug it according to the
Host WiFi Network
LED and Button
LED
Reset Long press for 2
WPS Press to take
Router
Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong
Colour Status
/ Off
Red Flash
On
Purple On
Blue On
/ Off
Blue Flash
On
/ Off
Blue Flash
On
Press and hold Reset button for 2 seconds until all
seconds the LED lights turn on and off.
Press the WPS button until WPS LED start flashing.
effect
LED.
Extender
Halfway
Indication
No host Wi-Fi configuration
Connecting / not connected to host Wi-Fi
Connected to host Wi-Fi, signal is weak
Connected to host Wi-Fi, signal is fair
Connected to host Wi-Fi, signal is good
Not connected to host Wi-Fi
The system is booting or upgrading
System startup is complete
Not connected to host Wi-Fi
WPS in progress
Connected to host Wi-Fi
7
Clients
Extended Network