Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• It is advisable to begin with the highest setting (6) and then reduce the
setting until you reach the desired beard length.
• Hold the distance comb with the angled edge against your beard and
guide the trimmer against the direction of hair growth.
• To avoid clogging the distance comb with hair, clean it from time to time
with the brush. Please note that the distance comb can only be taken off,
when the trimmer is turned off.
Contour trimming (C)
• The contour trimmer is ideal for precisely outlining beard contours, for
shaping partial beards and also for removing long single hairs.
• To use the contour trimmer, take off the distance comb. Tip (tilt) the
twin cutter system so that the narrow contour cutter locks in the upper
position.
Keeping your trimmer in top shape
Cleaning and care (D)
• After each use, take off the distance comb and slightly shake or brush
hair from the beard trimmer and the distance comb.
• Press the release buttons to lift off the twin cutter system. Using the
brush, clean the twin cutter system and the inside of the trimmer.
• To keep the twin cutter system working properly, we recommend that
you oil the cutting system regularly with light machine oil.
• Then click the twin cutter system back to original position by pushing
forward.
Subject to change without notice.
This product conforms to the EMC-Requirements as laid down
by the Council Directive 89/336/EEC and to the Low Voltage
Regulation (73/23 EEC).
7
Werbung
