Werbung
Verfügbare Sprachen
Verfügbare Sprachen
149/1 Bass Trombone Stand
- solid, robust metal stand
- folds compactly, especially suitable for mobile use
- exceptionally easy to adjust to suit almost all trombones:
-
a. The stand is freely adjustable (700 to 1160 mm)
-
b. The distance between ball and cone support is also freely adjustable
- the wood cone support has soft felt protection
- set-up and dismantling is easy, no need for tools
Thank you for choosing this product. These instructions contain information
about the installation and use of the stand. We suggest you keep the instructions in a safe place
for later use.
SAFETY INSTRUCTIONS
- use only on a suitable, even and stable surface.
- before positioning the instrument, ensure that the
-
distance between the ball and the cone support of the
-
stand is correctly adjusted as:
-
the entire weight of the instrument is carried by the
-
cone support.
-
The ball is merely a positioning prop for the bass
-
trombone.
-
WARNING: too much weight on the ball could deform
-
the metal.
- ensure the height of the stand is correct
- position the instrument with care
- take care when setting up and dismantling the stand,
-
beware of pinching hands and fingers
- the high quality floor protectors are virtually free of
-
plasticisers;
-
However, if necessary (sensitive flooring) use a non-
-
slip underlay.
ASSEMBLY
The 14910 bass trombone stand is very easy to set up.
All the components are pre-assembled.
1 Extend the legs
2 Loosen the pedestal knob
3 Move the pedestal down until the stop position is
3
reached, re-tighten knob.
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14910-013-55 Rev.01 03-80-215-00 12/12
Werbung
