Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
Use
1.
Fix the clip [5] to your desk or table.
2.
Insert the base of the lamp [3] into the clip [5].
3.
Connect the lamp to the mains. To do so, insert the power plug [4] of the power adapter into the
power input [2] of the lamp. Insert the power adapter into the mains outlet.
4.
Switch on your VTLLAMP10 lamp with the on-off button [1] and adjust the lamp head to the ideal
position. Switch off and disconnect from the mains after use.
7.
Cleaning and Maintenance
Your VTLLAMP10 does not require any particular maintenance. However, cleaning it regularly will
keep it clean.
Wipe with a dry cloth.
o
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the lamp.
o
Before cleaning, unplug the lamp completely from the mains.
8.
Technical Specifications
LEDs
colour
colour temperature
number
intensity
dioptre
energy consumption Ec
power consumption
dimensions
arm length
width
height
lens
power adapter
cable length
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 09/01/2015
VTLLAMP10
cold white
> 6000-6400 K
32x SMD LEDs (not replaceable)
2800 mcd/LED, 9 lm/LED
5 (magnification 2.25)
4 kWh/1000 h
4 W
39 cm
12.5 cm
55
Ø 95 mm
100-240 VAC, 50/60 Hz, 0.4 A - 4 W, 24 VDC - 120 mA (incl.)
± 1.2 m
993 g
4
©Velleman nv
Werbung
