Teesa DREAM WAVES 300 Bedienungsanleitung Seite 28

28
1. Connect the appliance to the power mains. Display activates and OFF appears.
2. Turn on the hair waver by pressing the ON button.
3. Set the desired temperature: press the + button to increase temperature, press the – button to decrease temperature.
Selected temperature value flashes on the display until set temperature has been reached. You can lock selected
temperature by pressing and holding the –/+ button what prevents from accidental temperature change during use.
Padlock icon appears on the display. Press and hold this button again to unlock (padlock icon disappears).
• Do not start heating if the hotplates are locked!
EN
• Select the temperature which is suitable for your hair type. Lower temperatures are recommended for weak and fine
hair. Use higher temperature settings for normal, thick or curly hair.
4. Hold the appliance at the handle. Always keep a safe distance between the appliance and your body.
5. Take a small section of hair and place it in between the plates.
6. Clamp the hair waver and press lightly for a few seconds.
OPERATION
Owner's manual