Operations; Working Modes - Merax Ex306071Aaa Benutzerhandbuch

8. Compound key
Touch both "DOWN" and "UP" to start or shut off the viewing temperature function. When the
viewing temperature function is turned on, the temperature indicator light is on, the digital
tube displays the ambient temperature, and automatically switches to the humidity display
state after displaying for 10 seconds.

5. OPERATIONS

Please make sure the unit power is accordance with local power grid.
Please press both sides of the swing to manually adjust the swing leaf to the desired angle.

1. WORKING MODES

DEHUMIDIFY MODE
After the first power-on, it will default to dehumidify mode or enter dehumidify mode through mode
switching. The default setting humidity is 40%, the set humidity is displayed, and high wind operation
is performed.
a) When Hr>Hs+3%, the compressor starts, and the fan runs at the set wind speed.
When Hr<Hs-3%, the compressor stops, and the fan automatically turns to low wind (the wind
speed can be adjusted at this time).
When Hs-3%<=Hr<=Hs+3%, keep running in the original state.
b) Display the set humidity (CO-35-85%RH), press the UP and DOWN adjustment key to adjust the
set humidity.
c) The fan speed is adjustable.
d) Child-lock and timer functions can be set.
e) When the ambient humidity does not reach the set humidity, the red indicator light of the "OK"
light on the display panel is off. When the ambient humidity reaches the set humidity, the "OK" light
on the display panel will light up in red.
f) When the set humidity is "CO", the compressor runs continuously without the limitation of the
set humidity (to meet the three-minute delay protection of the compressor), and the fan speed is
adjustable. "CO" is displayed, child-lock and timer can be set.