insta360 Nano Handbuch Seite 4

2.3 Charging and Power
Use power adapter of iPhone6/6s series(5V/1A),and connect to the Micro USB charging port to charge
Insta360 Nano,When fully charged,the red light goes off.
Connect Insta360 Nano to iPhone as shown to start the camera(*Note:connecting to your iPhone while
charging will not start the camera),The camera will enter the standby mode when the blue indicator light
turns green.
The camera will be automatically turned off when unplugged from iPhone.
2.4 Reset
If the camera becomes unresponsive,you can use an eject pin to poke the reset pinhole,or long press the
power button over 15 seconds to reset the camera.The indicator light will go off if successfully reset.