Tec4med Multi-Use Box High Performance Auspack- Und Einpackanleitung Seite 4

Packing
Then insert the PCM holder and place
the remaining PCM unit in the recess.
(Optional) Insert the TempBeacon into
the recess provided in the PCM holder.
Closing
Close the outer cover and make sure
that the Passive Shipper is closed cor-
rectly.
Tec4med LifeScience GmbH
Packing
Insert the hygienic inner tray over the
PCM units. You can then place the
products to be transported in the Pas-
sive Shipper
Packing
Put on the insulating lid.
Make sure that the lid is placed cor-
rectly.
Otto-Hesse-Straße 19 T9 64293 Darmstadt