Tec4med Multi-Use Box High Performance Auspack- Und Einpackanleitung Seite 2

Packing
(Optional) Place a PCM set (4 units) on the
inner walls of the long side, 2 units on each
side, for runtime extension.
Packing
Then insert the cold pack holder and
place a PCM set (4 units) on the PCM
holder. (Optional) Insert the TempBeacon
into the recess provided in the PCM hold-
er.
Closing
Close the outer cover and make sure
that the Passive Shipper is closed cor-
rectly.
Tec4med LifeScience GmbH
Packing
Insert the hygienic inner tray over the
PCM units. You can then place the
products to be transported in the Pas-
sive Shipper.
Packing
Put on the insulating lid.
Make sure that the lid is placed cor-
rectly.
Otto-Hesse-Straße 19 T9 64293 Darmstadt