ACU-RITE DRO 100 Installationsanleitung Seite 14

6 Specifications
6.1 Product specifications
Product
Housing Die cast aluminum
Housing DRO 10x
dimensions
285 mm x 160 mm x 46 mm
DRO 203, DRO 30x
285 mm x 180 mm x 46 mm
Fastener system, VESA MIS-D, 100
mating dimensions 100 mm x 100 mm
Display
Visual display unit LCD Widescreen (15:9)
color screen 17 .8 cm (7")
800x 480 pixels
User interface User interface (GUI) with keypad
Electrical data
Power supply AC 100 V ... 240 V (±10 %)
50 Hz ... 60 Hz (±5 %)
Input power max. 30 W
Overvoltage catego- II
ry
Number of encoder DRO 10x
inputs
1, 2, or 3
DRO 203
3
DRO 30x
3 or 4
Encoder interfaces TTL: Max. current 300 mA
max. input frequency 500 kHz
KT 130, IOB 610 DC 5 V (±5 %)
interface
Data interface USB 2.0 Hi-Speed (Type C), max.
current 500 mA
14
Ambient conditions
Operating 0 °C ... 45 °C
temperature
Storage –20 °C ... 70 °C
temperature
Relative air 40 % ... 80 % r.H., non-condensing
humidity
Altitude ≤ 2000 m
General information
Directives
Pollution degree 2
Protection
EN 60529
Mass DRO 10x
DRO 203, DRO 30x
6.2 Product dimensions and mating
dimensions
Further information: Page 125 and the following pages.
All dimensions in the drawings are in millimeters.
ACU-RITE | DRO 100, DRO 203, DRO 300 | Installation Instructions | 01/2018
EMC Directive 2014/30/EU
Low Voltage Directive
2014/35/EU
Front panel and side panels:
IP 54
Rear panel: IP 40
1.5 kg
With Single-Pos stand: 1.6 kg
With Multi-Pos holder: 1.9 kg
1.9 kg
With Single-Pos stand: 2.0 kg
With Multi-Pos holder: 2.3 kg
With Mounting frame: 3.3 kg