Matrix AK 18-SP Originalbetriebsanleitung Seite 21

1. Safety instructions and warnings
The equipment complies with the safety
regulations required for electrical equipment.
Read through the instructions for use before
starting up the equipment.
Improper use can lead to personal injury and
property damage. Persons, who are not familiar
with the instructions, may not operate the
equipment.
Keep the instructions for use in safe custody.
Children and youths are not permitted to operate
the equipment.
2. Description of symbols
Pay attention to all the signs and symbols shown
in these instructions and on your tool. Make a
note of these signs and symbols. If you interpret
the signs and symbols correctly, your work with
the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
Do not dispose of spent batteries in
household waste. You have a duty
under law to return spent batteries for
NiCd
correct disposal.
3. Machine components (B1)
1. ON/OFF switch
2. Clockwise/Anti-clockwise direction slide
3. 0.8 – 10 mm chuck
4. Torque setting
5. Keyless chuck
6. Battery
7. Battery snapper
8. Charger
9. Power supply
4. Proper usage
.
The device is designed for drilling into wood,
metal, and cement as well as for screwing.
.
The manufacture assumes no liability
whatsoever for improper use or if the machine
has been tampered with.
.
Give equal attention to the safety instructions,
assembly and operating instructions as well as
prevailing accident preventions regulations.
GB
21