Technical Information; Environmental Protection - PROLUMIA LED PRO-AQUA II Gebrauchsanleitung

TECHNICAL INFORMATION

Art. no. LED type
40281141 * SMD2835
40281241 * SMD2835
40281441 SMD2835
40281541 SMD2835
*) Not available with through wiring.
TESTING
Test emergency function after installation.
Standard version
N
L
A
L, N = Un-switched line
L1 = Switched line
A = Test emergency operation
HOW TO REPLACE BATTERIES
1. Cut the power supply first.
2. Pull out the plug of batteries from the emergency driver.
3. Remove the old batteries.
4. Fix the new batteries.
5. Connect the plug onto the emergency driver.
6. Record the date of commissioning of the batteries.
MAINTENANCE
1. Cut off the mains power first.
2. Don't touch LED while
maintaining or cleaning.
3. Don't use chemical reagent to
clean fixture.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Dimensions (LxWxH)
(mm)
1274x90x90
1574x90x90
1274x140x90
1574x140x90
L
1 2
Mains
power
www.prolumia.eu
Power consump-tion (W)
19
31.5
36.5
57.5
High power version
N
L
A
L, N = Un-switched line
L1 = Switched line
A = Test emergency operation
Light output
(LM)
2300
3900
4600
7300
L
3
Soft cloth
7