Technical Data - PROLUMIA LED PRO-AQUA II Gebrauchsanleitung

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
CAUTION
1. The product must be installed by qualified technicians. The power supply must be cut before installation.
2. The installation wiring must be 3x 1,0 - 2,5mm² at least and wired in accordance with the latest IEE electrical regulations or the national
requirements.
3. Cut the power supply before replacing battery.
4. Do not touch the electronic circuit and its components.
5. When fixture is unable to maintain the 1 hour duration under battery operation, then the battery must be replaced.
6. Contact an authorised technical service center for the replacement of the battery and use only original manufacturer spare parts for any other
repairs.
7. Code for identification of battery production date: ex.1810 --- 2018, week 10.
8. Do not touch the LEDs while installing or maintaining.
9. The LED light source of the fixture cannot be replaced. The complete product must be replaced if the light source is defect.
10. The charge of the battery will decrease by self-discharge if not connected to mains supply. Prolonged periods without voltage can damage the
battery. Battery warranty claims, as a result of such abuse, are specifically EXCLUDED from warranty terms.
11. On many building sites, power circuits may be cut off in an uncontrolled and repetitive basis during construction. As a result, any unit on these
circuits, will have their batteries discharged or 'cycled' . Excessive battery cycling will reduce through-life performance and may lead to premature
battery failure. Battery warranty claims, as a result of such abuse, are specifically EXCLUDED from warranty terms.

TECHNICAL DATA

Supply voltage: AC 220-240V 50/60Hz
Light source: LED SMD2835
Batteries: Ni-Cd Duration: 1h
Operating temperature: -10°C - +50°C / -10°C - +40°C (sensor version)
Electrical safety class: Class I
LED Pro-Aqua II - 1274mm
LED Pro-Aqua II - 1574mm
6
90
90
900
1274
90
90
1200
1574
www.prolumia.eu
140
90
900
1274
LED Pro-Aqua II High power - 1274mm
140
90
1200
1574
LED Pro-Aqua II High power - 1574mm